In industrial transmission, industrial conveyor chain is our common equipment. It is a flexible component composed of the same adjacent or opposite parts. It has multi-tooth load-bearing, safe and reliable, large center distance range, low manufacturing and installation accuracy requirements, etc. advantage. As a common equipment in industrial production, we can’t just throw it away....

  Stainless steel chain has been used for a long time, and the surface is prone to carbon deposits and oil stains. Then Motorcycle Chain Manufacturers will explain to you how to clean the stains on the chain correctly? If there is carbon deposits on the chain, chemical and mechanical methods can be used to remove it without damaging the chain. In the former, the chain is directly...

Motorcycle Chain  Manufacturers introduces how to deal with the error of stainless steel sprocket correctly? Observe the horizontal movement of the stainless steel sprocket drum and the vertical movement of the stainless steel sprocket. If the value of the stainless steel sprocket exceeds 3mm, it should be related to the roller sleeves on both sides of the adjustment hole of the industrial...

Stainless steel chain is a kind of machinery and equipment with a wide range of transmission force. It is designed according to the hyperbolic arc "chain buckle" scheme to reduce sliding friction. It is used in areas where the driving force is relatively large and the running speed is relatively slow. It is significantly better than chain transmission. Advantages, such as anti-tank, pneumatic...

Motorcycle Chain Manufacturers introduce how to disassemble the sprocket components correctly  1. Pull out the dirt on the conveyor, lock the belt conveyor, and remove the rear cover of the chain shaft tenon set of the tail rudder of the belt conveyor. Inform the welder on the operation panel to start the belt conveyor at a low speed. When the pair of lock-type link chains...

The normal operation of Silent Chain relies on the usual maintenance and protection of the chain. For the chain that needs to be cleaned, it is recommended that you can use metal powder, which can easily clean the oil on the chain, without irritating odor, and please be very safe. After each cleaning and washing, you need to lubricate the chain. Insufficient chain lubrication will increase...

Because of its specific functions, the Silent Chain has a different assembly method from other chains, creating the unique endurance and pulling force of the Silent Chain . And this kind of chain is used in various machinery in various industries such as agriculture, mining, metallurgy, petrochemical industry and lifting and transportation. For the chain, maintenance is required after a period...

The stainless steel chain uses cycloid as the gear transmission of the tooth profile. The contact stress between the transmission tooth surfaces is small, the wear resistance is good, and there is no undercutting phenomenon, but the manufacturing accuracy is high, and it is very sensitive to the center distance error. Jiangsu chain is only used in clocks and meters. Planetary gear transmission...

The Transmission Chain is a very critical transmission structure in mechanical equipment, which affects the working performance and service life of the equipment. Therefore, it is very necessary to maintain the chain at ordinary times. 1. The sprocket should be installed on the shaft without skew or swing. The end faces of the two sprockets in the same assembly should be in the same plane. When...

If the conveyor chain is not maintained for a long time, it will cause problems such as increased failure rate and shortened service life. The daily maintenance of the conveyor chain is generally divided into primary maintenance and secondary maintenance. Here Transmission Chain Manufacturers will give you a specific introduction. 1. During the normal use of the conveyor chain, due to normal or...