If you want the highest productivity for your crops, then you will need to get the John Deere combine adjustment guide for farm machinery operators.

In the olden days, harvesting crops used to be a very boring task. However, due to the increased efficiency of modern technology, harvesting among farmers can now be done mechanically. Many farmers make use of the various parts of the combine to perform various tasks on the farm. For instance, a John Deere combine can be used to easily reap maximum farm benefits for a farming contractor. This is done if they routinely follow the John Deere combine adjustment guide for various crops. This post analyses a few of those crops.

1). Canola – Combine settings

When using your combine to process Canola seeds, you will need to change up your default combine settings. Based on the John Deere combine adjustment guide, you will need to adjust the settings for your machine. You will need to adjust the cleaning sieve and cylinder settings to the highest values. Then you will need to tune both the pre-cleaner and the concave to their settings with the lowest values. 

2). Soybeans – Combine settings

For farmers, Soybeans is a type of crop that is difficult to be harvested. However, this can be done if they know how to apply the John Deere combine adjustment guide. You will need to check the function of the machine’s cutter bars. Ensure that this part works properly. You will still need to check on the concave and cylinder’s performance. During operation, make sure that a decent amount of air flows in. This helps to simplify the cleaning and the crop cutting process. 

3). For corns with high moisture – Combine settings

The John Deere combine adjustment guide can also be used to control the operation of the machine when it comes to corns with high moisture. Farmers usually find it difficult to handle corn crops that have high moisture. However, John Deere has recommended some adjustments for combine operators to follow to get optimal performance. The combine setting guide can be used to change your combine settings. You should ensure that the sieve, chauffeur, concave, and so on are calibrated, without much chance for errors. You will need to adjust the auger to face the downward position. When operating the combine make sure that the deck plates are tightly fixed. The John Deere combine adjustment feature comes with a default function that helps to adjust the machine’s settings if its situations change.

4). Oats – Combine settings

When working with the oat plants, you will require a different setting for your machine. If you are using the cylinder with the value of 600, you can then set the value of your concave to 3. The speed of the machine will have to be increased gradually. If you are using the 50RPM cylinder, you must increase its speed gradually. You will still need to increase the speed of the concave by 0.5 at each step. This value setting is most suitable when working in hot conditions. It is also a condition that can be used for the processing of ripe oats. The John Deere combine adjustment guide helps bring the best out of your combine when using the machine for oats processing.